EQD.Dirt.Transmitter

$145.00

Dirt Transmitter Fuzzdriver
The Dirt Transmitter is dual transistor crumbling fuzz tone. The bias control affects the voltage to the transistors which can create super cool gated velcro fuzz when turned counter clockwise or bring it back to life by turing it clockwise. It's "properly biased" around 2'OClock on the dial. Adjusting the tone with the bias is a must to achieve a wide range of sounds. The fuzz control can produce tones from overdrive like break up to all out thick ripping fuzz tones while never getting flabby. Excessive amounts of volume and virtually no extraneous noise. Works great with both single coils and humbuckers, clean up with the guitar volume is excellent .
Controls:Bias Fuzz Level Tone(Allow 3 week minimum shipping time)

EQD.Monarch

We get a lot of questions on this more than fantastic overdrive by EarthQuaker Devices and as OD's go it's on of the best not to mention one of our personal favorites. 

Monarch Overdrive

The Monarch Overdrive is an all discrete, FET based dirt machine. It’s designed around the input stage of a vintage amp produced by a company that bears the same name as the color of the monarch (hint...). It’s been configured to produce higher gains that sound very natural and free of compression. The treble and bass controls function as frequency boosters, not the traditional roll off filters in most OD’s. They are located in the preamp section and have a large impact on the over all tone, nature and distortion characteristics of the pedal as well as your amp. It gives big bottom end with a snappy, bright top at all gain ranges with some careful tuning of the tone controls. If you are looking for an overdrive for big fat chords with excellent low end retention, this is it! And, yes, it's true bypass.

Handmade with sweet loving care in Akron Ohio.

Measures4.37" X 2.37" X 1.75" with knobs

PowerAny regulated 9-18 volt DC power supply with a negative 2.1mm center barrel. Higher voltages will yield more headroom with a fatter and more focused tone and a wider gain range.Controls:Treble- Boosts the HighsBass- Boosts the LowsGain- Controls the overdriveLevel- Output

Hear this pedal

EQD.Tone.Job

$145.00 U.S.

The newest creation from EarthQuaker Devices is here!

Tone Job

Welcome to the Tone Job, a complete tone enhancement tool designed around a stereo preamp to cover as much frequency range as possible. What does this mean for you, the user? It means it can handle a wide variety of frequencies from electrical guitars, bass guitar, synthesizer machines and just about anything else you can plug in. The treble, bass and middle controls can cut or boost up to 20db. In addition to that, the level control will boost the signal (post EQ) up to 5 times the input depending on where the dial is set. It's very plug and play and easy to dial in on all applications.

Controls

Level: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 O’ Clock. 

Treble: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.


Bass: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.


Middle: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.

Treble affects frequencies from around 2k Hz up, bass affects frequencies from around 500 Hz down. The middle is an adjustable resonant filter acting as a mid-range control with it’s center frequency around 1k Hz. Treble and bass response are dependent on middle control settings.

EQD.Speaker.Cranker

SPEAKER CRANKER IS NOT A BOOSTER, IT'S AN OVERDRIVE.

The Speaker Cranker is an all discrete dirt enhancement device designed to give your amp some grit and a slight boost without drastically changing the character or tone of your set up. It’s perfect for those that don’t like to fiddle with pesky controls yet want to add a little tube-like breakup or enhance an already over driven amp (or pedal) to give it some extra crunch without over loading the preamp. The single “More” control allows you choose the amount of break up you desire. Just like you would with a tube amp, back it off to thin out the sound and clean it up or crank it up for a fuller sound with a bit of compression.

Measures4.37" X 2.37" X 1.5" with knobs

Power9v Battery or any standard 9 volt DC power supply with a negative center 2.1mm barrel.

Controls:
More- Controls the amount of dirt

EQD.Bit.Commander

This is one of our favorites of EarthQuaker Device's line up and it demands attention!

The Bit Commander is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. It’s no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.

Like all analog octave effects, there are some basic rules to follow that will get you the most enjoyment from your Bit Commander. Use the neck pickup and play single notes. The best tracking occurs from the 7th fret up on all the strings. Below the 7th will still track but there will be occasional glitches and stutters. The lower the note, the harder it is for the Bit Commander to register. The use of Bass and lower registers on keyboards will yield unexpected, sometimes pleasing, sometimes disgusting results. These are not mistakes or flaws, it is the nature of analog octaves.

Controls:

Sub: Two octaves down level

Down 1: One octave down level

Up 1: One octave up level

Base: Squared input signal level

Level: Master volume

Filter: Tone control, more highs clockwise, more warmth counter clockwise

The Bit Commander is analog & true bypass. Made by hand! 

Reviewed here by Premier Guitar Magazine!