Showing posts with label Burriss. Show all posts
Showing posts with label Burriss. Show all posts

Friday, October 26, 2012

Tuesday, December 6, 2011

Burriss.Boostiest.2.5

When you think of the name Burriss you think of amps, great amps. However, do not overlook The Boostiest 2.5 made by Burriss. When an amp company makes a pedal that continuously gets great reviews and is an all together "hot" item you know it's got to be great!



The Burriss Boostiest is a combination of two totally independent gain pedals in a single enclosure. On the right side(input side) there is a fully adjustable clean gain pre-amp. On the left side(output side) there is a "TS" flavored overdrive circuit. Both circuits feed from the same power source, a single 9V battery or a standard "boss" style power supply.
This power source is divided and stepped up to a 16V~18Voperating voltage for the clean gain boost side and lowered or "browned out" for the overdrive circuit. Both circuits are true bypass and can be used alone or together. 
"I believe that this topography gives the best combination for a big clean tone and a fatter overdrive tone." -Bob Burriss, Designer and Custom Builder

CONTROLS
Gain: To achieve the most natural overdrive tone, set the gain knob low and the level control high. The most overdrive effect can be achieved with the level set low in combination with higher gain.
Tone: This is a high frequency roll-off control that is used to compensate for the tone changes that occur when the device is engaged.
Level: This is the master volume control for the overdrive circuit.
Output: This is the master volume control for the boostier circuit. It should be used in conjunction with the gain control to adjust the desired girth of the note.
Highs: This control is intended to compensate for the increased bandwidth (brightness) as the gain is increased. Roll this knob back to adjust the stock (bypassed) tone curve.
Input: This is the gain control of the boostier (clean boost) channel. This knob is designed to be a set-it-and-forget-it kind of control. It is NOT an attenuator. It is a bias adjustment that will make a TERRIBLE, SCRATCHY NOISE if adjusted with the circuit on. (DON'T TRIP! this is absolutely normal) All adjustments should be done with the device in bypass mode or off.

We will have a demo video of this pedal soon. 

All together this is by far one of the best combo boost/overdrives pedals we have played! We have The boostiest ready fro demo along with other Burriss products any time at Elevation Boutiques. Purchase the Boostiest straight from us for limited time pricing. 
Email for special pricing: Brandon@elevationboutiques.com 

Wednesday, October 19, 2011

Burriss.Dirty.Red


Hailed for it's no compromise overdrive tones, the Burriss Dirty Red delivers the goods in spades. The perfect choice for the demanding guitarist that requires solid overdrive tones in an environment calling for lower stage volumes.

Packed with features normally reserved for large stage amps like a dynamic preamp control that dials in the perfect amount of overdrive and sustain. The Dirty Red includes a full 3 band tonestack, a versatile top cut control for final tone shaping and a flexible master volume to adjust the output levels to meet the demands of your session or gig.

Additionally, it features a foot switchable series effects loop which also contains the same innovative pedal board power supply found on the Royal Bluesman. Burriss was first to offer this concept which provides guitarists a slick method of powering virtually any 9vdc effects pedal right off the included Powerloop footswitch.
It is also capable of operating with out a speaker load. When the powerswitch is placed in the FX mode it lets the user use the Dirty red as a high gain preamp. The Dirty Red is all housed in a custom chassis and weighing in at a scant 12.7 lbs. This ultra small small footprint 18 watt all tube amp is handmade with care and ready to rock your head off! It's equipped with 4-8-16 ohm speaker outputs, 50/60hz and world power ready. This amp is CE and ROHS certified and proudly hand made in the USA!

The Dirty Red retails at $1195.00 (Includes the power loop footswitch, cable, & power cord.)

Stats-
11.5"x 6.75" x 7.13"
Only 12.7 lbs
Class A
EH - EZ81 Rectifier
Two J/J EL84's
Three 12AX7 Mullards
Full EQ
Use as a Preamp
A foot switchable Effects Loop
(pedal optional)
Extremely flexible Master Volume
Multi-Tap Outputs 4,8 & 16 ohms
Universal Power Supply
Hand Built in the USA
includes Power Loop

To order The Dirty Red or any Burriss products email Brandon@elevationboutiques.com

Check out the video review below by Premier Guitar Magazine!